Causes and solutions of some quality problem​s during rubber mixingFirst, the surface is not smooth and rough:Cause:1. The film is too thick.2. The temperature difference between the two rollers is large.3. The temperature of the two rollers is too low.Solution:1. Adjust the roll distance to meet the technological requirements.........

Rubber mill, as its name suggests, is mainly used for rubber mixing. Made of international quality vanadium-titanium alloy steel, two hollow rollers or drilling rollers that rotate inward in opposite directions are called front rollers installed on the operator's side, which can be moved horizontally back and forth by manual......

Hands are the most vulnerable parts of the human body. There are as many types and causes of injuries to the hands and arms as they do the same amount of work. Hand injuries account for about a quarter of all work-related injuries. In general, hand injuries are not life-threatening, but can lead to life-long disability and loss of ability to work and live. Therefore, the protection of hands and arms is a very important part of occupational safety......

Hands are the most vulnerable parts of the human body. There are as many types and causes of injuries to the hands and arms as they do the same amount of work. Hand injuries account for about a quarter of all work-related injuries. In general, hand injuries are not life-threatening, but can lead to life-long disability and loss of ability to work and live. Therefore, the protection of hands and arms is a very important part of occupational safety. Mechanical injuries are the most common. Among rubber and plastic machinery and equipment, open mills are the most common type of industrial accidents......

The safety of the mill has always been the most worrying issue for various rubber and plastic equipment manufacturers. The biggest hidden danger of the mill is that many customers are worried about this problem when they buy an open mill. However, due to the needs of production, they must use an open mill. Therefore, in view of the safety of this open mill, the new type of open mill made by Lena , it solves the problem of the safety factor of the mill......

The word rubber comes from the Indian language and means "tree that weeps". Rubber is native to the western region of Mara Yue in the Brazilian Amazon. The open mill is a product of the times. After understanding many characteristics of rubber, the emergence of the open mill is inevitable. The open mill is the earliest and most basic rubber machinery in the rubber industry with a relatively simple structure. As early as 1820, human-driven single-roll trough rubber mixers appeared. With the continuous development of rubber technology, open mills are also constantly updated and replaced......