The safety of the mill has always been the most worrying issue for various rubber and plastic equipment manufacturers. The biggest hidden danger of the mill is that many customers are worried about this problem when they buy an open mill. However, due to the needs of production, they must use an open mill. Therefore, in view of the safety of this open mill, the new type of open mill made by Lena , it solves the problem of the safety factor of the mill.

​

The open mill is one of the equipment with the highest incidence of industrial accidents in the rubber mixing process. Compared with other mixing equipment, its working environment is the reason for its increased risk factor. The operator The material and rollers are constantly in contact when operating the equipment. Work accidents are mostly caused by the operator being brought into the roller by the material. Then, in order to ensure the personal safety of engineers and operators, training of safety knowledge and a device with a high safety factor are essential.

Traditional mills are mostly driven by chains. The biggest problem is that if an accident occurs during operation, the machine will be powered off to protect it. Will continue to turn during inertia, or use the hold-brake system, still leaving the employee in a situation of sustained injury and very difficult to deal with. In the case of safety accidents on the open mill, minor injuries may result in crush injuries to the hands, and severe injuries may endanger the entire arm or even life.

According to the natural reaction of the human body, safety devices are installed on all aspects of the mill. When the operator's hand is about to clip into the mill, our safety device will be touched due to the spontaneous combustion reaction of the human body. The training machine will immediately perform two commands. The first one stops immediately without inertial movement, and the second one immediately reverses a quarter turn. At this time, even if the fingers are slightly pinched, it will pour out. The large open mill is designed with a belly-touch switch, which can be adjusted according to the height of the human body and the length of the arms, so that the operator can only touch the working surface of the roller during operation. If the operator is pulled by the roller, he will touch this safety switch and will immediately stop. Invert.

Personal safety is more important than everything else, and keeping employees in a safe working environment is the most basic equipment requirement of Lena.