How to operate a rubber openmill to protect hands from being involved

Hands are the most vulnerable parts of the human body. There are as many types and causes of injuries to the hands and arms as they do the same amount of work. Hand injuries account for about a quarter of all work-related injuries. In general, hand injuries are not life-threatening, but can lead to life-long disability and loss of ability to work and live. Therefore, the protection of hands and arms is a very important part of occupational safety. Mechanical injuries are the most common. Among rubber and plastic machinery and equipment, open mills are the most common type of industrial accidents.

​

The common accidents of open mill are: crush and knife injury

1. Wrong standing posture

2. The rubber tapping knife is aimed at the body

3. The film is not cut and cannot be pulled hard

4. It is strictly forbidden to fill the roller with glue with one hand

Because the open mill needs to manually turn over the glue, the labor force is large, and people's safety awareness will decline at this time, and it is very easy for the hand to get stuck in the roller of the open mill. This is the reason why it is difficult to find a mill master in the market where you are located. It is a device that makes the rollers reverse in the case of emergency braking. This function can be realized as long as a relay of the same power is installed in the original circuit. The equipment should be operated by special personnel. At the same time, it is strictly forbidden for two people to operate at the same time. Gloves are not allowed. Those with long hair must wear a hat and must put their hair in the hat. The feeding force is uniform, and the end of the material must be turned around and cut. Difficulty concentrating; do not operate when taking medicine or drinking.